Skip to main content

CONTACT LENS CLEANING & DISINFECTING—DISINFECTION TIPS

To better care for your contact lenses, here are some tips on how to use Blink RevitaLens® Multi-Purpose Disinfecting Solution (MPDS):

RINSE for contact-lens-wearing comfort when you insert your lenses:
  1. Wash your hands with soap and water and dry with a lint-free towel.
  2. Prior to reapplying lenses, RINSE each side of the lens for 5 seconds with fresh Blink RevitaLens® Multi-Purpose Disinfecting Solution (MPDS) to remove any debris on the lens.amo-blk-136-rinse.png
RUB, RINSE & SOAK for effective disinfection when you remove your contact lenses:
  1. Wash your hands with soap and water and dry with a lint-free towel prior to handling your lenses.
  2. Place 3 or more drops of Blink RevitaLens® Multi-Purpose Disinfecting Solution (MPDS) on one side of the lens surface.
  3. RUB your lens gently from the center to the edges for 2–4 seconds (never rub in a circular motion, because it may tear the lens and not clean the outer edge surface).amo-blk-136-rinse-rub-soak.png
  4. Turn the lens over and repeat steps 2 and 3.
  5. RINSE each side of the contact lens for 5 seconds with fresh Blink RevitaLens® Multi-Purpose Disinfecting Solution (MPDS). Place lenses in clean lens case and fill with Blink RevitaLens® Multi-Purpose Disinfecting Solution (MPDS). Close lens case tightly.
  6. SOAK – Allow lenses to soak for a minimum of six (6) hours for disinfection, cleaning, protein removal and conditioning.
CARING FOR YOUR LENS CASE
  • Always rinse your lens case daily with fresh Blink RevitaLens® Multi-Purpose Disinfecting Solution (MPDS) and let it air-dry. Never use tap water. Never reuse contact solution.
  • Replace your lens case every 1–3 months.
Important questions about eye health and contact lenses

Be sure to ask your doctor these important questions about eye health in your first or next visit.