Fill the Oxysept® Cup to the fill line with Oxysept® Disinfecting Solution. Drop one Ultrazyme® Enzymatic Cleaner tablet into the contact solution. Then drop one Oxysept® Neutralizing tablet into the solution. Immediately place the lens holder containing the lenses into the Oxysept® Cup. Tighten the cap. Gently turn the Oxysept® Cup upside down and then right side up 3 consecutive times to wet the upper surfaces of the cup and the inside of the cap. Allow the lenses to soak for a minimum of 6 hours to overnight.
RUB, RINSE AND WEAR
Before removing lenses from the lens case, turn the lens case upside down to ensure full neutralization of all residual disinfecting contact solution in the lens case. When you are ready to wear your lenses, remove one lens at a time and gently rub and rinse thoroughly with an appropriate sterile rinsing solution. Then apply lenses.
Use only the Oxysept® Cup with the blue left lens basket for weekly enzymatic cleaning/disinfection and neutralization. Do not substitute any other lens case.
Use only Oxysept® Disinfecting Solution/Neutralizer components. Do not substitute.
Do not use Ultrazyme® Enzymatic Cleaner Tablets if you are allergic to the enzyme subtilisin or any other ingredient listed on the label.
Problems with contact lenses and lens care products could result in serious injury to the eye. It is essential that you understand contraindications, warnings, precautions and possible adverse reactions and carefully follow your eye care professional's directions and all labeling instructions for proper use and care of your contact lenses, lens case and lens care products. For further details, click on the Indication and Important Safety Information